BEARING UCP-205
Description
BEARING UCP-205
BEARING UCP-205
GI NUT 10 MM
TYRE 12.0/75 -18 MT63 HD 12PR TL (TVS)
PUMP 1HP (MINI CHROME)
NUT BOLT 10MM X 80MM
.jpeg)
NH FUSE 125 AMP
BEARING 6312 - 2Z
FLANGE 8" 18MM
STUD 2N/2W M 30 X 140 MM FT
INLINE FANS SUITABLE FOR INSTALLING IN ANY POSITION IN VERTICAL AND HORIZONTAL DUCTS. THE CASING SHOULD BE DOUBLE SKIN, INTERNALLY ACCOUSTICALLY LINED AND CONSTRUCTED OF GALVANISED STEEL. THE FAN SHOULD BE DIDW WITH FORWARD CURVE IMPELLER FITTED WITH MAINTENANCE FREE EXTERNAL ROTTER MOTOR. THE MOTOR SHALL BE COMPLETED FOR 220+-10% VOLT SINGLE PHASE 50 CYCLES AC SUPPLY. ALL UNIT SHALL BE COMPLETE WITH DUCT FLEXIBLE CONNECTOR AND VOLUMN CONTROL DAMPER. THE FAN HAVE LOW SOUND LEVELNOT EXCEEDING MORE THAN 45 DBA AT THREE METER DISTANCE. 900 CFM, 10 MM WC STATIC PRESSURE
SUPPLY OF DOUBLE INLET DOUBLE WIDTH CENTRIFUGAL BLOWER OF THE INDICATED AIR FLOW CAPACITY WITH SUITABLE CAPACITY DRIVE MOTOR, BELT DRIVE SET, VIBRATION ISOLATORS, ALL MOUNTED INSIDE A DOUBLE SKIN HOUSING SIMILAR TO THE AHUS. THE TOTAL STATIC PRESSURE OF THE BLOWERS SHALL BE 40 MM W.G. AND AIR FLOW CAPACITY IS 15000 CFM(CFT D/FDA 560/CM (I) )
© 2020 STC Associate. All rights reserved | Design by @Punisher aka King117