SRK25CSS-S6/SRC25CSS-S6
Description
SRK25CSS-S6/SRC25CSS-S6
SRK25CSS-S6/SRC25CSS-S6
R/TEE 65 X 50 MM SCH-40 SEAMLESS
V - BELT B - 140
FLEXIBLE PIPE 1"
SWR SOLVENT 100G
HOT ROLL COIL PLATE 10MM (8" X 4")
SOCKET 1"
UNION 32MM
.jpg)
HAMMER BIT 12X160 (MAKITA)
SMOKE EXTRACTION FAN AS PER SPECIFICATION. FAN SHALL BE WITH DIRECT DRIVEN VANE AXIAL FLOW FAN. FAN AND CASING SHALL BE SUITABLE FOR SMOKE EXHAUST APPLICATION. MOTOR SHALL BE MOUNTED INSIDE THE FAN CASING & THERMALLY RATED FOR 250 DEG C FOR 2 HROUR AS PER [BS-7346 PART-2:1090] CLASS-H. MOTOR SHALL BE SUITABLE FOR 415 +-10% VOLT, 50 CYCLE, 3 PHASE AC SUPPLT WITH EFFICIENCY, EEF-1 TYPE AND FAN TOTAL EFFICIENCY SHOULD NOT BE LESS THAN 75%. TOTAL STATIC PRESSURE SHALL BE CHECK BY THE CONTRACTOR BASED ON APPROVED SHOP DRAWING. THE FAN SHALLL BE EQUIPED WITH ,MOUNTING BRACKET, FIRE RATED FLEXIBLE CONNECTIONS, SPRING ISOLATORS FOR THE INSTALLATION OF THE FAN. 6000 CFM, 20 MM WC STATIC PRESSURE, MOTOR CAPACITY 2.2 KW
FLANGE 2-1/2" T/E
© 2020 STC Associate. All rights reserved | Design by @Punisher aka King117