BULL POINT 250 SDS PLUS D-08713
Description
BULL POINT 250 SDS PLUS D-08713
BULL POINT 250 SDS PLUS D-08713
SUPPLY AIR GRILLES WITH AL.VCD - LINEAR FIXED BAR GRILLES, HORIZONTAL FIXED BARS, NORMAL BLADE(5MM NOMINAL THICKNESS) GRILLE HEIGHT 16MM, BLADE PITCH 12.5MM.(SIZE:400MM(W) X 150MM(H)
PULLEY 135 MM OD X 2B THROUGH BORE 38 X 10 X 3.3
BLACK BOP TAPE 2
REDUCER 5/8" X 7/8"
BEARING HOUSING DE 65/38
NUT BOLT WITH WASHER BRASS
HEX NIPPLE 1/2" X 1/2" X 4" (MALE & FEMALE )
TAPER LOCK V PULLEY SPA-140X1G
NUT BOLT 12MM X 50MM
INLINE FANS SUITABLE FOR INSTALLING IN ANY POSITION IN VERTICAL AND HORIZONTAL DUCTS. THE CASING SHOULD BE DOUBLE SKIN, INTERNALLY ACCOUSTICALLY LINED AND CONSTRUCTED OF GALVANISED STEEL. THE FAN SHOULD BE DIDW WITH FORWARD CURVE IMPELLER FITTED WITH MAINTENANCE FREE EXTERNAL ROTTER MOTOR. THE MOTOR SHALL BE COMPLETED FOR 220+-10% VOLT SINGLE PHASE 50 CYCLES AC SUPPLY. ALL UNIT SHALL BE COMPLETE WITH DUCT FLEXIBLE CONNECTOR AND VOLUMN CONTROL DAMPER. THE FAN HAVE LOW SOUND LEVELNOT EXCEEDING MORE THAN 45 DBA AT THREE METER DISTANCE. 1100 CFM, 10 MM WC STATIC PRESSURE
© 2020 STC Associate. All rights reserved | Design by @Punisher aka King117