MS DRILL BIT 6MM
Description
MS DRILL BIT 6MM
MS DRILL BIT 6MM
PULLEY 160MM OD X 2B TL-2012 BORE 30 X 8.5 X 4
TEE 1-1/2"
CABLE TRAY 250 X 25 (16G)
AXIAL FLOW FAN AS PER SPECIFICATION. FAN SHALL BE DIRECT DRIVEN. FAN AND CASING SHALL BE SUITAB;E FOR NORMAL MAKE UP AIR APPLICATION. MOTOR SHALL BE MOUNTED INSIDE THE FAN CASING & THERMALLY RATED. MOTOR SHALL BE SUITABLE FOR 415+-10% VOLTS, 50 CYCLE, 3 PHASE AC SUPPLY WITH HIGH EFFICIENCY, EFF-1 TYPE AND FAN TOTAL EFFICIENCY SHOULD NOT BE LESS THAN 65 %. THE FAN SHALL BE EQUIPPED WITH MOUNTING BRACKET, FIRE RATED FLEXIBLE CONNECTIONS, SPRING ISOLATORS FOR THE INSTALLATION OF THE FANS. 13000 CFM, 20 MM WC STATIC PRESSURE, MOTOR CAPACITY 3.7 KW
NUT BOLT 1-1/2" X 6MM
BEARING 6304 2Z
SMOKE EXHAUST FAN, CATALOUGE NO. APS0634AA10/16, 5000 CFM, STATIC PRESSURE (PA) 196 WITH MOTOR RATING OF 1.1 KW/4 POLE, FRAME - D90S
CABLE TRAY 200 X 50 (16G)
BOLT
BEARING 51575U NBC
© 2020 STC Associate. All rights reserved | Design by @Punisher aka King117